基于器件结构提高TADF-OLED器件的发光性能

为了提高以TADF材料作为主体、天蓝色荧光材料作为客体的混合薄膜的OLED器件光电性能,我们调整了器件结构,使主体材料发挥其优势。制备了基本结构为ITO/NPB(40 nm)/DMAC-DPS∶x%BUBD-1(40 nm)/Bphen(30 nm)/LiF(0.5 nm)/Al的OLED器件。研究了主-客体材料在不同掺杂浓度下的OLED器件的光电特性。为了提高主体材料的利用率,在空穴传输层和发光层之间加入10 nm的DMAC-DPS作为间隔层;然后,在阳极和空穴传输层之间加入HAT-CN作为空穴注入层,形成HAT-CN/NPB结构的PN结,有效降低了器件的启亮电压(2.7 V)。测量了有无HAT-CN的单空穴器件的阻抗谱。结果表明,在最佳掺杂比例(2%)下,器件的外量子效率(EQE)达到4.92%,接近荧光OLED的EQE理论极限值;加入10 nm的DMAC-DPS作为间隔层,使得器件的EQE达到5.37%;HAT-CN/NPB结构的PN结有效地降低了器件的启亮电压(2.7 V),将OLED器件的EQE提高到5.76%;HAT-CN的加入提高了器件的空穴迁移率,降低了单空穴器件的阻抗。TADF材料作为主体材料在提高OLED器件的光电性能方面具有很大的潜力。     

对史密斯-帕塞尔自由电子激光光栅的研究

为了研究史密斯-帕塞尔自由电子激光的输出频率和光栅槽深、光栅槽长、光栅槽宽的关系,对于基于矩形光栅的史密斯-帕塞尔自由电子激光利用粒子模拟软件进行模拟和理论分析。首先,利用粒子模拟软件模拟对于基于矩形光栅的史密斯-帕塞尔自由电子激光进行了研究,发现史密斯-帕塞尔自由电子激光的输出频率随光栅槽深、光栅槽长、光栅槽宽的增大而减少。接着,对史密斯-帕塞尔自由电子激光的光栅槽进行了理论分析,发现每个光栅槽都可以等效为一个LC谐振电路,并发现在史密斯-帕塞尔自由电子激光中存在两种辐射,一种是史密斯-帕塞尔辐射,另一种是LC振荡辐射。最后,对光栅槽的LC振荡辐射进行了估算,发现史密斯-帕塞尔自由电子激光输出频率的模拟值与光栅槽的LC振荡辐射估算值的数量级均为102 GHz,且变化规律上一致。据此推测决定史密斯-帕塞尔自由电子激光输出频率的应该是光栅槽,而不是谐振腔。     

Multi-variable special polynomials using an operator ordering method

Using an operator ordering method for some commutative superposition operators, we introduce two new multi-variable special polynomials and their generating functions, and present some new operator identities and integral formulas involving the two special polynomials. Instead of calculating complicated partial differential, we use the special polynomials and their generating functions to concisely address the normalization, photocount distributions and Wigner distributions of several quantum states that can be realized physically, the results of which provide real convenience for further investigating the properties and applications of these states.     

Synthesis,characterization, and some electrocatalytic properties of heteromultinuclear FeI/RuII Clusters

A series of new heteromultinuclear Fe^I/Ru^II clusters are described. The complexes (η⁶-arene)RuFe₂S₂(CO)₆ (arene = p-cymene 1 , C₆Me₆ 2 ) and Fe₂[μ-S (Cp*Ru)(CO)₂]₂(CO)₆ (Cp* = η⁵-C₅Me₅) ( 3 ) were prepared by the reduction reactions of (μ-S)₂Fe₂(CO)₆ with 2 equiv of LiHBEt₃, followed by treatment (μ-SLi)₂Fe₂(CO)₆ with ruthenium-arene complexes Ru₂(μ-Cl)₂Cl₂(η⁶-arene)₂ or Cp*Ru (CO)₂Cl in 22–33% yields. Further reactions of 1 and 2 with 1 equiv of triphenylphosphine in the presence of the decarbonylating agent Me₃NO·2H₂O, afforded the corresponding monophosphine-substituted Fe^I/Ru^II complexes (η⁶-arene)RuFe₂S₂(CO)₅(Ph₃P) (arene = p-cymene 4 , C₆Me₆ 5 ) in 75% and 78% yields. While treatment of parent complex 1 or 2 with 1 equiv of diphosphine Ph₂PCH₂PPh₂ (dppm) in xylene at reflux temperature resulted in the formation of the diphosphine-bridged RuFe₂S₂(CO)₉ derivate RuFe₂S₂(CO)₇(dppm) ( 6 ). The possible pathway for the formation was proposed. Two isomers of novel macrocyclic complexes involve the (η⁶-arene) Ru-bridged quadruple-butterfly Fe/S clusters [{μ-S (CH₂)₃S-μ}{(μ-CS₂)Fe₂(CO)₆}₂]₂[(η⁶-arene)Ru]₂ (arene = p-cymene 7a and 7b , C₆Me₆ 8a and 8b ) were isolated by reactions of two μ-CS₂-containing dianion [{μ-S (CH₂)₃S-μ}{(μ-S=CS)Fe₂(CO)₆}₂]²⁻ with [Ru₂(μ-Cl)₂Cl₂(η⁶-arene)₂], in which the propylene groups are attached to two S atoms by ee and ea types of bonds respectively. All the new complexes 1 – 8 have been characterized by elemental analysis, spectroscopy, and particularly for 1 – 6 , 7b and 8a by X-ray crystallography. In addition, the electrochemical properties of representative complexes 1 – 4 and 6 have been investigated.     

In situ decoration of CoP/Ti3C2Tx composite as efficient electrocatalyst for Li-oxygen battery

Application of Li-oxygen (Li-O₂) battery is in urgent need of bifunctional ORR/OER electrocatalyst. A surface-functionalization CoP/Ti₃C₂T_x composite was fabricated theoretically, with the optimized electronic structure and more active electron, which is beneficial to the electrochemical reaction. The accordion shaped Ti₃C₂T_x is featured with large specific surface area and outstanding electronic conductivity, which is beneficial for the adequate exposure of active sites and the deposition of Li₂O₂. Transition metal phosphides provide more electrocatalytic active sites and present good electrocatalytic effect. The CoP/Ti₃C₂T_x composite served as the electrocatalyst of Li-O₂ battery reaches a high specific discharge capacity of 17,413 mAh/g at 100 mA/g and the lower overpotential of 1.25 V, superior to those of the CoP and Ti₃C₂T_x individually. The composite of transition metal phosphides and MXene are applied in Li-O₂ battery, not only demonstrating higher cycling stability of the prepared CoP/Ti₃C₂T_x composite, but pointing out the direction for their electrochemical performance improvement.     

A Tale of Copper Coordination Frameworks: Controlled Single‐Crystal‐to‐Single‐Crystal Transformations and Their Catalytic CH Bond Activation Properties

Metal–organic frameworks (MOFs), as a class of microporous materials with well‐defined channels and rich functionalities, hold great promise for various applications. Yet the formation and crystallization processes of various MOFs with distinct topology, connectivity, and properties remain largely unclear, and the control of such processes is rather challenging. Starting from a 0D Cu coordination polyhedron, MOP‐1, we successfully unfolded it to give a new 1D‐MOF by a single‐crystal‐to‐single‐crystal (SCSC) transformation process at room temperature as confirmed by SXRD. We also monitored the continuous transformation states by FTIR and PXRD. Cu MOFs with 2D and 3D networks were also obtained from this 1D‐MOF by SCSC transformations. Furthermore, Cu MOFs with 0D, 1D, and 3D networks, MOP‐1, 1D‐MOF, and HKUST‐1, show unique performances in the kinetics of the C?H bond catalytic oxidation reaction.     

吡唑-3-甲酸Cu(Ⅱ)/Mn(Ⅱ)配合物的合成、表征及常压下对二氧化碳催化转化

合成和表征了2个吡唑-3-甲酸过渡金属配合物[Cu₂（pca）₂（H₂O）₆]·2H₂O（1）,[Mn（Hpca）₂（phen）]·3H₂O（2）（H₂pca=吡唑-3-甲酸;phen=菲咯啉）。X射线单晶衍射分析结果表明,配合物1属于单斜晶系P2₁/n空间群,它是一个畸变八面体的双核铜配合物;配合物2是一个畸变八面体的单核锰配合物。配合物1和2分别通过分子间的O-H…O,N-H…O氢键形成了三维网状结构。配合物1在二氧化碳的环加成反应中显示出了良好的催化效率（转化率高达97.4%;选择性高达98.9%）。